Agilent (Keysight) 1158A 4GHz Active Probe
This probe has had the grounding tube changed to a grounding pin.
Key Features & Specifications
- 4 GHz bandwidth
- Small size makes probing easier
- 88 ps rise time
- 100 k-ohm, 0.8 pF, non-resonant input
Description
The Keysight 1156A, 1157A, and 1158A family of active probes offers R & D engineers the performance they need to probe small geometries in hard-to-reach areas on the DUT. These probes were designed specifically for the Infiniium Series, and InfiniiVision 5000, 6000 and 7000 Series oscilloscopes (except for 6000 Series 100MHz models).
As the speeds in your design increase, you may notice more overshoot, ringing, and other anomalies when connecting an oscilloscope probe. Probes form a resonant circuit where they connect to the device. If this resonance is within the bandwidth of the oscilloscope probe you are using, it will be difficult to determine if the measurement anomalies are due to your circuit or the probe.
The Keysight 1156/7/8A probes optimize performance to make your job easier.
Combined with the Keysight 90404A and 90604A Infiniium scopes, the 1158A 4 GHz probe offers you a full 4 GHz of system bandwidth, giving you accurate insight into your high-speed devices.
- 4 GHz bandwidth
- Small size makes probing easier
- 88 ps rise time
- 100 k-ohm, 0.8 pF, non-resonant input
- +/-15 V offset
- 5 V peak-to-peak dynamic range; For waveforms with edges >3nsec, dynamic range is >12Vpp
- Accessories designed for minimal loading on your device and optimum response
- AutoProbe interface compatible
Notice: The Keysight 1157A/58A was discontinued June 1, 2014. End of support life for these products is Sept. 1, 2019. The N2750A-52A InfiniiMode differential probes or N2795A/96A single-ended active probes are the recommended replacement probes. For use with Infiniium 548xx, 8000, 80000 models, order InfiniiMax 1132A or 1134A with InfiniiMax probe head.
This item is offered with a 30 day warranty or more.
Any item with a price of $10000.00 or more will qualify for 90 day warranty with full price purchase. All seals must be intact for warranty to apply.
US POWER AND TEST EQUIPMENT INC. , TERMS OF SALE
FREIGHT POLICY
Products are shipped F.O.B. origin to customer's single location located in the contiguous United States, in accordance with US Power and Test Equipment Inc. 's freight schedule. Receipts for shipping will not be furnished. COD shipments are not permitted. Other terms and conditions may apply for other than standard ground delivery (“Other Freight Services”), including without limitation, expedited same day delivery, air freight, freight collect, export orders, sourced products, non-stock products hazardous materials, customer's carrier, shipments outside the contiguous U.S. or other special handling by the carrier. Any charges incurred for other Freight Services must be paid by customer. Fuel surcharges may be applied. Title and risk of loss pass to customer upon tender of shipment to the carrier. If the product is damaged in transit, customer's only recourse is to file a claim with the carrier.
PRODUCT WARRANTY POLICY
Products Damaged in Shipment
Products damaged in shipment will be repaired or replaced at no cost to customer if US Power and Test Equipment Inc. is notified within 10 days of delivery and shipment was made using sellers shipping account. Customer should immediately notify carrier of any visible damages upon delivery.
Limited Warranty Period for Used Products
US Power and Test Equipment Inc. warrants used products against defects in materials and workmanship under normal use for a period of one (1) year after the date of purchase from US Power and Test Equipment Inc., unless otherwise stated, or in the case of haz-mat, sourced, or custom products. provided that US Power and Test Equipment Inc. accepts the product for return during the limited warranty period, US Power and Test Equipment Inc. may, at its option: (i) repair; (ii) replace; or (iii) refund the amount paid by customer. US Power and Test Equipment Inc.'s repair, replacement, or refund of amounts paid by customer for the product, shall be customer's sole and exclusive remedy.
Warranty Disclaimer and Limitations of Liability to All Customers
Except as set forth herein and where applicable, no warranty or affirmation of fact or description, express or implied, is made or authorized by US Power and Test Equipment Inc. . US Power and Test Equipment Inc. disclaims any express or implied warranties of merchantability, fitness for a particular purpose or noninfringement of intellectual property rights. US Power and Test Equipment Inc. also disclaims any liability for claims arising out of product misuse, improper product selection, improper installation, product modification, mis-repair or mis-application. Any liability for consequential, incidental, special, exemplary, or punitive damages is expressly disclaimed to the extent permissible. US Power and Test Equipment Inc. 's liability in all events is limited to the purchase price paid for the product that gives rise to any liability.
Return Policy
To return a product during the Limited Warranty Period (30 days after date of purchase), customer must call 760-473-1732 for a return authorization number. Each return authorization number is valid for thirty (30) days. There is no restocking fee, except as otherwise noted herein, if products are returned within the Limited Warranty Period, shipping prepaid, and be unused, undamaged, new condition, with original packaging and all contents including manufacturer's original packaging unblemished and all accessories, manuals and warranties included. Test and Measurement equipment will incur a restocking fee of 20% if the seal on the box has been opened. Customer must include a copy of the packing list or invoice with a reason for the return. Late returns and incomplete returns will incur a 20%, or higher, restocking fee. Customer will waive and forfeit any and all rights to return any products, if the products have been modified in any way including; but not limited to, hardware or software changes, updates, deletions, removal or replacement of any parts, software or firmware; or modifications of any other kind.
